| Peak Current Delivery |
50A 1Ohms/1ms |
| Signal to Noise Ratio |
> 109dBr (A-weighted) (±2dB) |
| Frequency Response |
20Hz - 50kHz (±0.5dB) |
| THD+N. 8Ω. 1kHz |
< 0.05% (-3dB) |
| Minimum Recommended Load Impedance (per channel) |
4 Ω (which equals one 4Ω load or two paralleled 8Ω loads) |
| Damping Factor (8 Ohm load) |
≥ 1000 |
| Input Sensitivity RCA |
1.0 V |
| Input Sensitivity XLR |
1.55 V |
| Gain RCA |
32dB |
| Gain XLR |
28dB |
| Input Impedance |
33 KΩ |
| Source Selector |
A toggle switch is provided in back panel to select between RCA and XLR |
| Input Connections |
Unbalanced (RCA) & XLR one each per channel |
| Speaker Output Connections |
Audiophile grade 5-way binding posts |
| Power Requirements |
230 VAC @ 50 / 60 Hz |
| AC Power Switch |
Rocker switch (switches AC main power) |
| Trigger |
12V Trigger for amplifier standby feature, connector provided at back panel |
| Protection |
Protected against excessive operating temperature, shorted speaker connections, ground faults |
| Dimensions |
17” wide x 6” high x 16” deep (not including connectors and feet) |
| Weight |
74 LBS / 34 Kgs (unboxed) |