Hey
Chat with us on WhatsApp for best prices, offers and queries!
Hey
Chat with us on WhatsApp for best prices, offers and queries!
| Parameter | Specification |
|---|---|
| Topology | Class- AB |
| Channels | 11 |
| Configuration | 3 X 300W + 8 X 150W |
| Condition | 8Ω | 4Ω |
|---|---|---|
| 1 Channel Driven | 188W | 400W |
| 2 Channels Driven | 165W | 340W |
| 3 Channels Driven | 150W | 300W |
| Condition | 8Ω | 4Ω |
|---|---|---|
| 1 Channel Driven | 140W | 240W |
| 2 Channels Driven | 130W | 219W |
| All Medium Channels Driven | 100W | 150W |
| Parameter | Specification |
|---|---|
| Peak Current Delivery – High Power Channels | 50A 1Ω / 1ms |
| Peak Current Delivery – Medium Power Channels | 25A 1Ω / 1ms |
| Signal to Noise Ratio | > 108dBr (A-weighted) (±2dB) |
| Frequency Response | 20Hz - 50kHz (±0.5dB) |
| THD+N. 8Ω. 1kHz | < 0.05% (-3dB) |
| Minimum Recommended Load Impedance (per channel) | 4 Ω (which equals one 4Ω load or two paralleled 8Ω loads) |
| Damping Factor (8 Ohm load) | ≥ 600 (High Power Channels), ≥ 200 (Medium Power Channels) |
| Input Sensitivity | 1.0 V for RCA and 1.8 V for XLR |
| Gain RCA | High power channel – 30dB, medium power channel – 28dB |
| Gain XLR | High power channel – 26dB, medium power channel – 23dB |
| Input Impedance | 33 KΩ |
| Source Selector | A toggle switch is provided in back panel to select between RCA and XLR |
| Input Connections | Unbalanced (RCA) & XLR one each per channel |
| Speaker Output Connections | Audiophile grade 5-way binding posts |
| Power Requirements | 230 VAC @ 50 / 60 Hz |
| AC Power Switch | Ring LED LIGHT (switches AC main power) |
| Trigger | 12V Trigger for amplifier standby feature, connector provided at back panel |
| Protection | Protected against excessive operating temperature, shorted speaker connections, ground faults |
| Dimensions | 17” wide x 10.5” high x 22” deep (not including connectors and feet) |
| Weight | 128 LBS / 58 Kgs (unboxed) |